Product
Products
Precision from machines, completion from people.
Teamwork completes the process; trust builds the future.
Robot — Designed and built in-house
JFX-R1
Parts of every shape and size, and production models that keep changing. JFX-R1 is JSOLUTION’s robot cell that combines an articulated robot, vision and custom grippers to automate odd-form insertion. We designed, built and commissioned it ourselves and delivered it to a customer line.
JFX = Just Fit × Flex. Built to fit your line, and flexible when the line changes.
- Vision checks the board and the part before accurate placement
- Recipes per model for fast product changeover
- Multi-gripper head built around your parts
- Inline conveyor links to neighbouring processes; MES link (option)
How it is built
Four parts that move as one
A robot chosen for the process
SCARA where fast horizontal motion matters, an articulated robot where parts must be approached from several angles.
Vision that checks first
Vision and sensors check the board and the part so that each part goes accurately into its place.
Grippers made for the part
Connectors, relays, transformers, large capacitors. We design and build the gripper around the part, and one head carries several grippers.
Fed by J-Series
Links with J-Series radial, stick, bowl and tray feeders so parts never run out. Feeders can be added to suit the line.
- 01 Two-finger handHolds large parts from both sides
- 02 Three-finger handCloses around round parts
- 03 Four-finger handWraps around coils and transformers
- VISIONVision on the head checks board and part
An explanatory diagram. Robot type and details vary with each customer’s process.
Smart Factory
How it fits into a smart factory line
JFX-R1 is not a stand-alone bench but one process in the line. It takes boards from the previous process, inserts odd-form parts, and hands them on.
Example of an automotive-electronics PCBA line. The actual sequence is designed for each customer line.
Process linked to process
An inline conveyor connects it to the machines before and after. Boards pass through insertion and on to soldering without manual handling.
Production data stays connected
Recipes manage each model, and I/O status, alarms and reports are shown on the HMI. An optional MES link exchanges data with the upper system.
Follows the line as it changes
A new gripper and program handle a new part, and extra heads and feeders widen the product range.
Software — Developed In-house
Smart operating software, built for the shop floor
We do not stop at the machine. The operating software, “AUTO INSERT SYSTEM”, is also developed by J Solution. Seven simple menus keep operators oriented, and everyday tasks take only a few steps.
- AutoAutomatic run · robot, feeders, boards and head on one screen
- Recipe Datarecipes per model
- Manualmanual control
- IO ListI/O status
- Alarm Listalarm history
- Reportproduction report
- Set Upsettings
- Easy to LearnQuick to pick upEveryday functions are grouped into seven menus, so the right screen is always one step away.
- Quick ChangeoverChange models by loading a recipeConditions for each model are saved as a recipe and loaded when the model changes.
- At a GlanceMachine status in one viewThe Auto screen shows the whole cell, and the I/O list shows input and output signals at once.
- TraceableProduction that leaves a recordAlarm history and production reports make it easier to trace causes and review output. An optional MES link connects to the upper system.
Process
From board in to board out
- PCB transferBoard enters on the conveyor
- Part feedingFeeders present the parts
- Pick-upThe gripper takes the part
- Vision checkBoard and part are checked
- PlacementInserted at the set position
- PCB outOn to the next process
Delivered Unit
The unit we delivered
Designed, assembled and commissioned by JSOLUTION, then supplied to the customer’s line.



Configuration
Configuration at a glance
| Board size | Up to 400 × 330 mm |
|---|---|
| Robot | SCARA or articulated |
| Vision | Vision inspection of board and part |
| Head | Multi-gripper head, configured for the parts |
| Feeders | Works with J-Series feeders, expandable to suit the line |
| Options | Auto clinching unit, MES link |
Detailed specifications are agreed for each part set and line condition.
Which one fits
MAI or robot — chosen for your line
JSOLUTION works with both. We look at your volume and part mix and propose the right one, or both together.
High volume, high speed
For lines that run a fixed set of parts at speed. Multiple heads and dual gantries raise throughput.
High mix, high flexibility
For lines where models change often or parts are awkward. A new gripper and program handle a new part, the compact cell fits tight spaces, and it can be redeployed when the process changes.
