Contact KOR

Tech Notes

What Is an Odd-form Insertion Machine? Three Ways to Mount Parts on One Board

SMD, through-hole and odd-form insertion — how a part reaches the board depends on its shape and packaging. Here is how the three methods differ and why odd-form insertion is worth automating.

2026.10.23 · Odd-form insertion · Process technology

Look closely at the green board inside any electronic product and you will see that not every part is attached the same way. Tiny chips sit flat on the surface, larger parts push their leads through holes and are held from the back — and then there are parts of every size and shape: transformers, large capacitors, relays, FETs. These are called odd-form components, and the machine that inserts them automatically is an odd-form insertion machine.

1. SMD — surface mount

Solder paste is printed on the board, chips are placed, and everything is melted at once in a reflow oven at 235–250 °C. From 0402 chips to QFP and BGA packages, parts are placed fast at ±25–50 μm, which suits dense, compact products. Printing is checked by SPI, placement by AOI and X-ray.

2. Through-hole insertion

Leads are formed, inserted through the holes, bent to lock (clinching) and then soldered by wave or selective soldering. Because the leads pass through the board, this is the strongest joint against vibration, shock and thermal shock — the choice for power stages, high-current and heat-dissipating parts.

3. Odd-form insertion

Irregular parts that standard machines struggle with are picked from feeders built for each part and inserted. In odd-form insertion, a laser measures every lead and corrects the position to around ±0.05 mm, insertion, press-fit and clinching are done while the force is monitored, and after placement the height is measured (ZHMD) to catch half-seated parts, with barcode and OCR keeping the history.

Mirae MAI Series odd-form insertion machine
Mirae MAI Series — JSOLUTION is Mirae’s authorized distributor in Korea, handling installation, commissioning and after-sales service.

The three methods at a glance

ItemSMDThrough-holeOdd-form insertion
Part typeLeadless and fine-pitch chips, packagesStandard leads (axial, radial, DIP)Irregular, large, uneven lead patterns
PackagingReel tape, tray, stickTaped reelReel, stick, tray, bulk, magazine — per part
MachineChip mounterAuto inserterOdd-form inserter + dedicated feeders
JoiningReflow solderingWave or selective solderingSelective soldering, press-fit, clinching
Accuracy±25–50 μm±0.1 mm class±0.05 mm (laser-measured correction)
InspectionSPI · AOI · X-rayAOI · ICTVision alignment · ZHMD · OCR · force monitoring

Why is insertion still needed?

Boards that carry high power and must survive vibration and heat — EV chargers and battery management, solar inverters, data-center power supplies — still need leaded parts. On these boards, the quality of the final insertion step decides the reliability of the whole product.

All three run on one line

On a real line the three methods follow each other: paste printing → SPI → SMD placement → reflow → AOI, then THT and odd-form insertion, selective or wave soldering, and finally ICT and final inspection. However fast the front of the line is, if the last insertion step stays manual, it sets the speed and quality of the whole line. That is why automating insertion is the final key to a fully automated process.

Wondering whether it fits your line? Send us photos of your parts and the board drawing, and we will start by working out which feeders and nozzles you need.

← All Tech Notes